Limited Fire Hazard Cable

Typical Cable Applications:

Suitable for use in fire risk locations: high rise buildings, sub-surface, underground & metro systems

Plain solid copper conductors, PE insulation, unit twin construction, polyester core wrap, fire retardant tape, drain wire, electrical screen, low smoke zero halogen sheath.
Compliant with British Telecom Standard CW1600.

B3 P/N	No. Pairs	Conductor Diameter (mm)	Nom Sheath Radial (mm)	Max O/All Diameter (mm)	Max Average Resistance (ohms)	Max Average Mutual Cap (nF/km)	Capacitance Unbalance 99% of cases (pf)
I-0003-P050-001-00-T-1600	3	0.50	0.60	4.8	97.8	80	500
I-0040-P050-001-00-T-1600	40*	0.50	0.90	15.0	97.8	80	500
I-0100-P050-001-00-T-1600	100*	0.50	1.50	27.0	97.8	80	500
I-0320-P050-001-00-T-1600	320*	0.50	2.20	39.5	97.8	80	500

Note 1: * These cables contain a 1.38 mm PVC insulated Earth wire
Note 2: Available in pair range 2 - 320 pair

TACW conductors of 0.5 mm, PVC insulation, unit twin construction, polyester core wrap,

fire retardant tape, low smoke zero halogen sheath.
Compliant with Saudi Arabian Telecom Standard MAT1401

B3 P/N	No. Pairs	Conductor Diameter (mm)	Nom Sheath Radial (mm)	Max O/All Diameter (mm)	Max Average Resistance (ohms)	Max Average Mutual Cap (nF/km)	Max Capacitance Unbalance within unit (pf/500m)
I-0010-P050-001-00-T-1401	10	0.50	0.90	9.0	92	75 ± 2	22
I-0030-P050-001-00-T-1401	30	0.50	1.10	13.0	92	75 ± 2	22
I-0050-P050-001-00-T-1401	50	0.50	1.20	16.0	92	75 ± 2	22
I-0100-P050-001-00-T-1401	100	0.50	1.30	20.0	92	75 ± 2

Note: Available in pair range 6 - 300 pairs

Plain solid copper conductors of 0.5mm, PE insulation, pair construction in concentric layers.
1 or more core wrap tapes, longitudinally applied aluminium-copolymer tape and low smoke zero halogen sheath.
Compliant with Spanish ICT standards

B3 P/N	No. Pairs	Conductor Diameter (mm)	Nom Sheath Radial (mm)	Nom O/All Diameter (mm)	Max Average Resistance (ohms)	Max Average Mutual Cap ( nF/km)	NEXT @ 1MHz	Attenuation @ 1MHz (dB/Km)	Characteristic Impedance (ohm/km)
I-0025-P050-001-45-AT-ICT	26	0.50	1.2	12.0	91	52	45	21	100
I-0050-P050-001-45-AT-ICT	51	0.50	1.2	16.0	91	52
I-0075-P050-001-45-AT-ICT	76	0.50	1.2	19.0	91	52
I-0100-P050-001-45-AT-ICT	101	0.50	1.2	21.0	91	52

OUTSIDE PLANT PRIMARY CABLES

Typical Cable Applications:

Outside Plant (OSP) Cables used primarily in the Primary or Exchange (‘E’-side) Network.

Plain solid copper conductors of 0.4 and 0.6 mm, PE insulation, pair construction in concentric layers,
1 or more core wrap tapes, service quad, HDPE sheath incorporating a longitudinally applied aluminium-copolymer tape.
Compliant with Italian Telecom Standard (Italian Standard) CT-1240

B3 P/N	No. Pairs	Conductor Diameter (mm)	Nom Sheath Radial (mm)	Nom O/All Diameter (mm)	Max Loop Resistance (ohms/km)	Max Average Mutual Cap (nF/km)	NEXT @1 MHz (dB)	Attenuation @ 1 MHz (dB/100m)	Characteristic Impedance (ohm/km)
E-1200-P040-001-50-AP-1240	1200	0.40	2.50	62.5	150	55	50	27	140
E-1600-P040-001-50-AP-1240	1600	0.40	2.70	72.0	150	55
E-2400-P040-001-50-AP-1240	2400	0.40	3.10	85.2	150	55
E-0800-P060-001-50-AP-1240	800	0.60	2.20	64.0	66.6	55
E-1200-P060-001-50-AP-1240	1200	0.60	2.50	79.0	66.6	55

Plain solid copper conductors of 0.4 and 0.6 mm, PE insulation, pair construction in concentric layers,
1 or more core wrap tapes, service quad, HDPE sheath incorporating a longitudinally applied aluminium-copolymer tape,
helical steel tape armour, HDPE sheath.
Compliant with Italian Telecom Standard (Italian Standard) CT-1240.

B3 P/N	No. Pairs	Conductor Diameter (mm)	Nom Sheath Radial (mm)	Nom O/All Diameter (mm)	Max Loop Resistance (ohms/km)	Max Average Mutual Cap (nF/km)	NEXT @1 MHz (dB)	Attenuation @ 1 MHz (dB/100m)	Characteristic Impedance (ohm/km)
E-0100-P040-001-50-AP-1240HP	100	0.40	1.80	21.6	150	55	50	27	140
E-0200-P040-001-50-AP-1240HP	200	0.40	1.80	29.1	150	55
E-0800-P040-001-50-AP-1240HP	800	0.40	2.20	51.4	150	55
E-1200-P040-001-50-AP-1240HP	1200	0.40	2.50	62.5	150	55
E-2400-P040-001-50-AP-1240HP	2400	0.40	3.10	85.2	150	55
E-0100-P060-001-50-AP-1240HP	100	0.60	1.80	29	66.6	55
E-0200-P060-001-50-AP-1240HP	200	0.60	1.90	37.3	66.6	55
E-0800-P060-001-50-AP-1240HP	800	0.60	2.70	70.5	66.6	55
E-1200-P060-001-50-AP-1240HP	1200	0.60	3.00	87	66.6	55

B3 P/N	No. Pairs	Conductor Diameter (mm)	Nom Sheath Radial (mm)	Nom O/All Diameter (mm)	Max Average Resistance (ohms)	Max Average Mutual Cap (nF/km)	NEXT @ 1MHz	Attenuation @ 1MHz (dB/Km)	Characteristic Impedance (ohm/km)
E-0025-P050-001-45-AP-ICT	26	0.50	1.2	12.0	93	52	45	21	100
E-0050-P050-001-45-AP-ICT	51	0.50	1.2	16.0	93	52
E-0075-P050-001-45-AP-ICT	76	0.50	1.2	19.0	93	52
E-0100-P050-001-45-AP-ICT	101	0.50	1.2	21.0	93	52

Plain solid copper conductors of 0.5 mm, PE insulation, quad constructions, a perforated wire of solid copper with a diameter of 0.5 mm,
Polyurethane filled, 4 x TACW continuity wires with a diameter of 0.41 mm, PE sheath, layer of galvanized steel wires, and green PE sheath.
Compliant with Netherlands Standard PTT NORM 92.

B3 P/N	No. Quads	Conductor Diameter (mm)	Nom Sheath Radial (mm)	Max O/All Diameter (mm)	Max Average Resistance (ohms)	Max Average Mutual Cap (nF/km)	NEXT @ 1MHz	Attenuation @ 1MHz (dB/Km)
E-0012-Q050-001-40-PGP-NM92	6	0.50	1.20	17.0	93	40	40	15
E-0030-Q050-001-40-PGP-NM92	15	0.50	1.50	21.5	93	40
E-0050-Q050-001-40-PGP-NM92	25	0.50	1.50	30.0	93	40

Plain solid copper conductors of 0.4, 0.6, and 0.8 mm (Serial 89), PE insulation, pair construction in concentric layers,
1 or more core wrap tapes, continuity wire, HDPE sheath incorporating a longitudinally applied aluminium-copolymer tape.
Compliant with French Telecom Standard (Normes France) NF C 93-526 & NF C 93-527-7.

B3 P/N	No. Pairs	Conductor Diameter (mm)	Nom Sheath Radial (mm)	Nom O/All Diameter (mm)	Max Loop Resistance (ohms/km)	Max Average Mutual Cap (≤ 28 Prs,nF/km)	Max Average Mutual Cap (≥ 28 Prs,nF/km)	Max Capacitance Unbalance (within quad, pF/600m)	Max Capacitance Unbalance (between quads, pF/600m)
E-0014-P040-001-00-AP-93526	14	0.40	1.30	7.9	293.6	55	52.5	500	250
E-0056-P040-001-00-AP-93526	56	0.40	1.50	13.0	293.6	55	52.5	500	250
E-0014-P060-001-00-AP-93526	14	0.60	1.40	10.8	130.5	55	52.5	500	250
E-0056-P060-001-00-AP-93526	56	0.60	1.60	17.7	130.5	55	52.5	500	250
E-0008-P060-001-00-AP-93526	8	0.80	1.40	10.3	73.4	55	52.5	250	125
E-0028-P060-001-00-AP-93526	28	0.80	1.60	16.5	73.4	55	52.5	250	125

Plain solid copper conductors, solid PE insulation (0.4 mm cdr), foamskin PE insulation (0.6 & 0.8 mm cdr), pair construction in concentric layers, petroleum jelly filled, 2 x core wrap tapes, continuity wire, corrugated steel tape armour, HDPE sheath.
Options: Helical steel tape armour (Series 75) compliant to NF C 93-526 & NF C 93-527.
Compliant with French Telecom Standard (Normes France) NF C 93-527-9 & NF C 93-527-1

B3 P/N	No. Pairs	Conductor Diameter (mm)	Nom Sheath Radial (mm)	Nom O/All Diameter (mm)	Max Loop Resistance (ohms/km)	Max Average Mutual Cap (nF/km)	Max Capacitance Unbalance (within quad, pF/600m)	Max Capacitance Unbalance (between quads, pF/600m)
E-0112-P040-001-00-SP-93527	112	0.40	2.00	22.0	293.6	55	500	250
E-0112-P060-001-00-SP-93527	112	0.60	2.20	26.4	130.5	55	500	250
E-0112-P080-001-00-SP-93527	112	0.80	2.20	34.4	73.4	55	250	125

Note: Single armoured version available in pair range 8 - 1792, double armoured 28 - 224

Plain solid copper conductors, PE insulation, 25 pair unit twin construction,
dry core, polyester/paper core wrap, Aluminium - copolymer moisture barrier, black PE sheath.
Compliant with Bahrain Telecommunications Specification BTC1961 & British Telecom Standard CW1171.

B3 P/N	No. Pairs	Conductor Diameter (mm)	Nom Sheath Radial (mm)	Max O/All Diameter (mm)	Max Average Resistance (ohms)	Max Average Mutual Cap (nF/km)	Capacitance Unbalance 99% of cases (pf)
E-4800-P032-001-00-D-AP-1171	4800	0.32	2.70	76.0	223	53	275
E-1000-P040-001-00-D-AP-1171	1000	0.40	2.30	51.5	143	53	275
E-2400-P040-001-00-D-AP-1171	2400	0.40	2.70	75.0	143	53	275
E-0100-P050-001-00-D-AP-1171	100	0.50	1.70	23.5	91	56	275
E-0800-P063-001-00-D-AP-1171	800	0.63	2.70	70.5	58	56	275
E-0100-P090-001-00-D-AP-1171	100	0.90	2.00	38.0	28	59	275

Note: Cables available in pair range 50 - 4800

Plain solid copper conductors, cellular PE insulation, 25 pair unit twin construction,
dry core, polyester/paper core wrap, Aluminium - copolymer moisture barrier, black PE sheath.
Compliant with Cable & Wireless Specification CW0006 & British Telecom Standard CW1224.

B3 P/N	No. Pairs	Conductor Diameter (mm)	Nom Sheath Radial (mm)	Max O/All Diameter (mm)	Max Average Resistance (ohms)	Max Average Mutual Cap (nF/km)	Capacitance Unbalance 99% of cases (pf)
E-4800-P032-001-00-D-AP-1224	4800	0.32	2.70	76.0	223	53	275
E-2400-P040-001-00-D-AP-1224	2400	0.40	2.60	70.0	143	53	275
E-0100-P050-001-00-D-AP-1224	100	0.50	1.70	22.0	91	56	275
E-2000-P050-001-00-D-AP-1224	2000	0.50	2.70	75.0	91	56	275
E-0800-P063-001-00-D-AP-1224	800	0.63	2.50	61.0	58	56	275
E-0100-P090-001-00-D-AP-1224	100	0.90	1.90	32.5	28	59	275

Note: Cables available in pair range 50 - 4800

OUTSIDE PLANT SECONDARY CABLE

Typical Cable Applications:

Outside Plant (OSP) Cables used primarily in the Secondary or Distribution (‘D’-side) Network

A-2Y(L)2Y St III Bd Local Cable

Plain solid copper conductors of 0.4, 0.6 or 0.8 mm, solid PE insulation, quad construction in concentric layers,
plastic core wrap tape, PE sheath incorporating a longitudinally applied aluminium-copolymer tape.
Compliant with German Telecom Standard (Verband der Electrotechnik) VDE 0816 Part 1.
Options: Steel tape Armour - A-2Y(L)2Y2BY, Steel Wire Armour - A-2Y(L)2YR

B3 P/N	No. Pairs	Conductor Diameter (mm)	Nom Sheath Radial (mm)	Nom O/All Diameter (mm)	Max Loop Resistance (ohms/km)	Max Mutual Cap (nF/km)	Max Capacitance Unbalance (k1, 300m, pF)	Max Capacitance Unbalance (k9,12, 300m, pF)
E-0100-P040-001-00-D-AP-0816	100	0.40	1.80	21.0	300	50	800	800
E-0100-P060-001-00-D-AP-0816	100	0.60	2.00	25.0	130	52	800	800
E-0050-P080-001-00-D-AP-0816	50	0.80	2.00	26.0	73.2	55	800	800

Note: Cables available in pair range 8 - 168

Plain solid copper conductors, cellular PE insulation, 10 pair unit twin construction, petroleum jelly filled, paper core wrap, PE sheath.
Compliant with Cable & Wireless Specification CW0011 (screened version) & British Telecom Standard CW1128.
Options: Moisture Barrier (CW1179), Steel Wire Armouring (CW1198) and Aerial Self Supporting (CW1252).

B3 P/N	No. Pairs	Conductor Diameter (mm)	Nom Sheath Radial (mm)	Max O/All Dia, no screen, unarmoured (mm)	Max O/All Dia, screened, unarmoured (mm)	Max O/All Dia, no screen, armoured (mm)	Max O/All Dia, screened, armoured (mm)	Max Average Resistance (ohms/km)	Max Average Mutual Cap (nF/km)
E-0100-P040-001-00-F-P-1128	100	0.40	1.3	18.5	20.0	25.3	26.8	143	56
E-0100-P050-001-00-F-P-1128	100	0.50	1.4	22.0	23.5	29.0	30.5	91	56
E-0100-P060-001-00-F-P-1128	100	0.60	1.6	32.0	33.5	40.2	41.7	63	42
E-0100-P063-001-00-F-P-1128	100	0.63	1.5	27.5	29.0	35.5	37.0	58	56
E-0100-P090-001-00-F-P-1128	100	0.90	1.7	36.0	37.5	44.4	45.9	28	59

Note: Cables available in pair range 2 - 100

Plain solid copper conductors, solid PE insulation, 10 pair unit twin construction,
petroleum jelly filled, paper core wrap, PE sheath.
Options: Moisture Barrier (CW1179), Steel Wire Armouring (CW1198) and Aerial Self Supporting (CW1252).
Compliant with British Telecom Standard CW1326.

B3 P/N	No. Pairs	Conductor Diameter (mm)	Nom Sheath Radial (mm)	Max O/All Diameter (mm)	Max Average Resistance (ohms)	Max Average Mutual Cap(nF/km)	Capacitance Unbalance 99% of cases (pf)
E-0010-P050-001-00-F-P-1326	10	0.50	1.20	12.0	91	56	275
E-0020-P050-001-00-F-P-1326	20	0.50	1.30	15.0	91	56	275
E-0050-P050-001-00-F-P-1326	50	0.50	1.40	19.5	91	56	275
E-0100-P050-001-00-F-P-1326	100	0.50	1.50	25.0	91	56	275

Note: Cables available in pair range 2 - 100

Plain solid copper conductors of 0.4, 0.51, 0.64 or 0.9 mm, foam skin PE insulation, twisted pair construction in concentric layers,
petroleum jelly filled, 1 or more core wrap tapes, PE sheath incorporating a longitudinally applied corrugated aluminium-copolymer tape.
Compliant with American National Standards Institute / Insulated Cable Engineers Association (ANSI/ICEA) S-84-608-2007.

B3 P/N	No. Pairs	Conductor Diameter (mm)	Nom O/All Diameter (mm)	Max Resistance (ohms/km)	Max Ave Mutual Cap (_x003C__ 12 Prs, nF/km)	Max Ave Mutual Cap (>_ 13 Prs, nF/km)	Max Individual Capacitance Unbalance (pF/km)	Attenuation @ 0.772 MHz (dB/305m)
E-0050-P040-001-00-F-P-PE89	50	0.40	14.0	144.2	52 ± 4	52 ± 2	145	7.0
E-0100-P050-001-00-F-P-PE89	100	0.50	22.0	89.5	52 ± 4	52 ± 2	145	5.6
E-0100-P064-001-00-F-P-PE89	100	0.64	27.0	56.6	52 ± 4	52 ± 2	145	4.5
E-0100-P090-001-00-F-P-PE89	100	0.90	38.0	28.0	52 ± 4	52 ± 2	145	3.2

Note: Cables available in pair range 6 - 2400
Option: Available as type PE-89 - Aerial Self Supporting compliant with ANSI/ICEA S-84-608-2007, RDUP 7 CFR 1755.890 & ANSI/ICEA S-85-625-2007 (support member)

Type PE-22 distribution cable

Plain solid copper conductors of 0.4, 0.51, 0.64 or 0.9 mm, solid PE insulation, twisted pairs, concentric up to 25 pairs, unit construction thereafter.
1 or more core wrap tapes, PE sheath incorporating a longitudinally applied corrugated aluminium-copolymer tape>
Compliant with American National Standards Institute / Insulated Cable Engineers Association (ANSI/ICEA) S-85-625-2007.
Cables compliant with ICT normative Infraestructura común de telecomunicaciones.

B3 P/N	No. Pairs	Conductor Diameter (mm)	Nom O/All Diameter (mm)	Max Resistance (ohms/km)	Max Ave Mutual Cap (_x003C__ 12 Prs, nF/km)	Max Ave Mutual Cap (>_ 13 Prs, nF/km)	Max Individual Capacitance Unbalance (pF/km)	Attenuation @ 0.772 MHz (dB/305m)
E-0050-P040-001-00-D-MP-PE22	50	0.40	14.0	144.2	52 ± 4	52 ± 2	145	7.0
E-0100-P050-001-00-D-MP-PE22	100	0.50	21.0	89.5	52 ± 4	52 ± 2	145	5.6
E-0100-P064-001-00-D-MP-PE22	100	0.64	26.0	56.6	52 ± 4	52 ± 2	145	4.5
E-0100-P090-001-00-D-MP-PE22	100	0.90	34.0	28.0	52 ± 4	52 ± 2	145	3.2

Note: Cables available in pair range 6 - 2400
Option: Available as aerial self supporting cable